Tags: Homelessness Research PaperWas Tutankhamun Murdered EssaySimple Small Business Plan TemplateScholarships Creative WritingTypes Of Problem Solving SkillsEssay On A Rose For EmilyProper Use Of References In An Essay
Of course I am no mechanical engineer, but that seems to be what is happening.Then there is the blower noise which is heard inside and outside on the Mach 8 units. It's not a tough job and will take about 15 to 30 mins to complete.
My wife actually had to get up in the night to go check it because she thought it wasn't running. I also wanted to note that there is a potentially huge loss of cooling power with the original install as Dynamax saw fit to just throw the gigantic control module box right down into the intake area of the 14" x 14" AC hole in the ceiling which consequently disrupts airflow significantly and blocks I would estimate about 30% or more of the airflow into the AC unit.
The solution is to move the control box up into the AC unit and screw it down.
Anyone with experience in cooling anything knows that the smaller the blades of a fan, the higher the RPM required to move the same amount of air.
As thumper mentioned you can replace the outer evaporator blower fan to reduce some of the noise, but the removal of blades reduces the air movement capacity.
God Bless, David & Cathy 2015 Trilogy 38FL 2016 Silverado 3500HD DRW Trailersaver TS-3 Hitch on B&W Platform For those that are saying their ac unit is loud, have you replaced the fan blade with the 3 blade fan?
Ours originally had 5 or 6 blades and I did a search and learned that if you replace those with the 3 blade fan it is much quieter. Dynamax didn't offer a pre-plumbed location for a third AC in the bunkhouse model until the 2015 model. At 42.5 feet, two ACs on the 37BH model is definitely the bare minimum required to adequately cool the trailer.
God Bless, David & Cathy 2015 Trilogy 38FL 2016 Silverado 3500HD DRW Trailersaver TS-3 Hitch on B&W Platform In 106 I wasn't going to be able to wait on any replacement parts. It has larger coils (condenser and evaporator) and moves more CFM than the Mach 8.
The mission was to find a solution and as fast as possible. To what extent I do not know, but then again I wasn't really very interested in another Mach 8. With just the front Mach 8 and the rear Mach 15, our camper is now staying 75 all day long even in direct South Louisiana sun all day at very high temperature and humidity levels. At this time of year, I walk out from the camper during the day and it's like walking into a gigantic sauna and water begins to condense on my skin. So, all around perhaps I spent some money that--given enough time in the heat and willingness to stay with the Mach 8 under warranty--I may not have HAD to spend. Can I mention again how much quieter this thing is?
It won't block the airflow near as much and will greatly assist the unit's ability to cool.
This can be done on the Mach 15 but there is no room to move that control box up into the AC unit in the original Mach 8.